Product Description

This kit came in the following Challenger Models 20000, 21000, 26000, 27000, 28000, 30000, 31000, 33000, 35000

OEM Part Number: 11012 , 200341

Alt Part Number: BH-7225-60

-HOW TO IDENTIFY YOUR CYLINDER:

Challenger Arlington cylinder will be marked with AA and have a chain going over a roller attached to the top. typically has 2 notches out of the cap for a spanner wrench with a wire retainer that twists out of a rectangle hole to take the cap off. the cylinder has a 2.5″ bore and a 36.5″ stroke. the main seal is a 3 piece it has a square o-ring that sits inside the groove of the seal and has a large square o-ring under that. 

-WHAT THIS KIT WONT’ FIT:

Challenger Auto Lifts stick cylinder ( no chain going over the cylinder). if the cylinder comes apart at the bottom , other models not listed, different stamped numbers or different serial number if specified

-RETURN POLICY ON SEAL KITS
Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag.  If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first.

Call our customer service hotline @ 866-902-6060 if you need help identifying which seal kit is best for you!