Product Description

This is 1 seal kit for VBM 2 Post Lifts made through the late 80s and through out the 90s with a 4ft tall cylinder that has a chain going over the top of it. This is for the “Marion ” version of this cylinder which should measure over 3.25″ or larger diameter on the outside of the cylinder barrel (inside bore of the cylinder is 3″)

This kit came in the following Challenger Models 20000, 21000, 26000, 27000, 28000, 30000, 31000, 33000, 35000

This seal kit is the same as Challenger

-HOW TO IDENTIFY YOUR CYLINDER:

Challenger Chain Over Cylinder Seal Kit For Marion Cylinder. The Cap Is At The Top And Held Together With A Square Wire Retainer And Has A Breather below That. The Cap Protrudes Out About 1/4″This Is The Only Cylinder With A 3″ Inside Diameter For The Listed Model Numbers. See last illustration to help ID your cylinder as a Marion

Additional Cylinder Info: 3″ BORE x 36.5″ STROKE

Models with OEM Cylinder: CHA11075

Replaces Challenger Part: 200067

Alternate Part: BH-7225-27, 11075, CHR1075

-WHAT THIS KIT WONT’ FIT:

Challenger Auto Lifts stick cylinder, other models not listed, different stamped numbers or different serial numbers if specified

-RETURN POLICY ON SEAL KITS
Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag.  If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first.

Call our customer service hotline @ 866-902-6060 if you need help identifying which seal kit is best for you!