Product Description

This is 1 seal kit for the hydraulic cylinder found under many Rotary 4 post cable lifts. It meets or exceeds factory specs. It fits lifts with capacity of 12000 pounds. This kit rebuilds texas hydraulics cylinders that rotary used through many years of production.

HOW TO IDENTIFY YOUR CYLINDER IS A TEXAS HYDRAULICS

If your lift has a texas hydraulics cylinder  it will  be stamped on the outside of the barrel. Texas hydraulic cylinder have two important stamping numbers that help in identifying what seals are in it.

1: The cylinder will have either the numbers “FC542” or “FC5342”

2: The cylinder will have a series of numbers starting with T or having TXT in the numbers (ex. T####### or ###TXT###)

If both of the above stampings are on the outside of the Barrel then this seal kit will work for your lift.

If you don’t see any stampings this may still fit but you are better off calling to verify. If you are still unsure if this seal kit will work for you, call our help hotline 866-902-6060 and we will be glad to determine what seal kit you need.

This kit came in the following model lifts and may fit others as well

Rotary Lift Model – SM122, AR122, SMO123, ARO122, QL4P-100 QLHV-100, SM101-100, SM120, AR120, CWA120, SM121, AR121, QL4P, QLHV, SM101

HOW LONG DOES IT TAKE?

This kit usually takes less than an hour to install and can be done with a vice, pipe wrench and a few hand tools.

-WHAT THIS KIT WONT’ FIT!

If you see the word “pacoma” or made in germany or you have a different FC number than the ones listed then your cylinder is not a texas hydraulic and this seal kit will NOT work with your lift but we offers those seal kits as well in our related products section below. ALSO there is a universal rotary 4 post seal kit that fits virtually all rotary 4 post that can be found below.

RETURN POLICY ON SEAL KITS

Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag. If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first.

Call us at 866-902-6060 if you have any questions about this product or any other auto equipment questions.

Rotary Car Lift  Hydraulic Cylinder Rebuild kit Seals for 4 Post lifts

Replaces Rotary FC542-12TH

Alternate Part # BH-7501-64

See Below for Fitment Specifications and more info on this seal kit