Product Description

This is 1 seal kit for the hydraulic cylinders found in VS-10 challenger 2 post auto lifts That have VS-10. This is for all seals needed to rebuild your cylinder ( wearbands are reused and typically don’t need replacement but we recommend inspecting for damage during rebuild process)

Aftermarket Replacement Seal Kit fit Challenger- VS10-SK , BH-7232-18R-SK

 This kit rebuilds cylinders with production date before 2009 ( serial number will start “0901 or lower number) that have thread on style caps that holds the cylinder together. This seal kit will rebuild ONE Cylinder if you are needing to rebuild both cylinders you will need TWO seal kits.

-HOW TO IDENTIFY YOUR CYLINDER IS A FAST 
your cylinder should have a npt style pipe thread fitting screwed into the bottom shaft ( not a oring boss style fitting)

-RETURN POLICY ON SEAL KITS
Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag.  If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first.

Call our customer service hotline @ 866-902-6060 if you need help identifying which seal kit is best for you!