Product Description

Forward Lift Seal Kit / Hydraulic Ram for Forward Hoist / Forward Car Hoist Rebuild Kit

This is 1 seal kit for the hydraulic cylinders found in forward 2 post lifts. It meets or exceeds factory specs. It fits lifts with capacity between 7,000 & 10000 pounds. This kit rebuilds Prince cylinders that forward used through many years of production. This seal kit will rebuild ONE cylinder if you need to rebuild both cylinders in your lift you will need TWO seal kits.

Replaces Part Numbers

Forward Part # 991281

Alternate Part # BH-7235-15 , 992317 cylinder

HOW TO IDENTIFY YOUR CYLINDER IS A PRINCE

If your lift has a Prince cylinder in it, it will be approximately 72.5″ tall and hang from the top of your lift with a chrome shaft coming out of the bottom of the barrel. Look approximately 8″-10″ below the very top of the cylinder (top of your lift where the bolt goes through the cylinder to anchor it to the lift) see ID stampings (see stamping example in pic #3). If it reads “Prince” or “AN” followed by numbers this is the proper seal kit for your lift. Also compare the gland /end cap of your cylinder to the one pictured on the left. The gland on a prince cylinder has 2 holes on the face of it for a spanner wrench. It protrudes about an 1/8″ out of the barrel of the cylinder and is flush / even with the barrel outside diameter (see pics 4 & 5 for gland id). If you have your cylinder apart already, compare your piston seal with the one pictured to the left. Prince cylinders have distinctive black, middle humped seal on the piston (pic 2 seal on left). If you are still unsure if this seal kit will work for you, call our help hotline @ 866-902-6060 and we will be glad to determine what seal kit you need.

This kit came in the following model lifts and may fit others as well

• This kit came in the following model lifts and may fit others as well dp07a , dpo7 , dp09 , dpo9a , dpo9a2 , dpo9s , dpo9s2 dp97 , dp97a, DP97A2 , dp97s , dp97s2 9000a , 9000an , 10000a , 10000a2 , 10000an , dp10 , dp10a , dp10an , dp10a2 , INT9 , ISP9S , I10 , I10111000

HOW LONG DOES IT TAKE?

This kit usually takes less than an hour to install and can be done with a vice, pipe wrench and a few hand tools.

WHAT THIS KIT WONT’ FIT!

If you see the letters “AA”, “T” or “TX” followed by #s or your gland is not the same design as the one pictured then your cylinder is not a PRINCE and this seal kit will NOT work with your lift, but we offers those seal kits as well in our related products section below.

RETURN POLICY ON SEAL KITS

Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag. If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first. Call us at 866-902-6060 if you have any questions about this product or any other auto equipment questions.

Forward Auto Lift Cylinder Seal kit 991281 2 Post Hydraulic Cylinder Rebuild Seals

Replaces Forward Lift # 991281

Fits Prince Cylinders

Alternate Part # BH-7235-15, 992317 cylinder

See Below for Full Product Description and Fitment Details